Der Wechsel des Ölfilters an einem Motorrad ist eine wichtige Wartungsaufgabe, die dafür sorgt, dass der Motor sauber bleibt und reibungslos läuft. Hier finden Sie eine Schritt-für-Schritt-Anleitung dazu.

Erste, Sammeln Sie die notwendigen Werkzeuge und Materialien. Sie benötigen einen Ölfilterschlüssel, eine Auffangwanne, ein neuer Ölfilter, und frisches Motoröl. Stellen Sie sicher, dass Sie den richtigen Filter für Ihr Motorradmodell haben.

Nächste, Lassen Sie den Motor einige Minuten lang warmlaufen. Dies trägt dazu bei, dass das Öl leichter fließt und stellt sicher, dass etwaige Verunreinigungen im Öl suspendiert werden.

Once the engine is warm, locate the oil filter. It is usually located near the engine, either on the side or underneath. Refer to your motorcycle’s manual if you’re unsure.

Position the drain pan beneath the oil filter to catch any oil that may spill. Use the oil filter wrench to loosen the filter by turning it counterclockwise. Be careful not to spill any oil on the hot engine or exhaust.

Once the filter is loose, carefully remove it by hand. Be prepared for some oil to spill out. Allow the remaining oil to drain into the drain pan.

Before installing the new filter, apply a thin layer of clean engine oil to the rubber gasket on the filter. This helps create a proper seal and prevents leaks.

Hand-tighten the new filter onto the engine by turning it clockwise. Once it is snug, use the oil filter wrench to give it a final quarter turn to ensure it is securely in place.

Now it’s time to add fresh engine oil. Refer to your motorcycle’s manual for the recommended type and quantity of oil. Use a funnel to pour the oil into the designated oil filler hole.

After adding the oil, start the engine and let it run for a few minutes to circulate the new oil. Check for any leaks around the filter and the oil drain plug.

Schließlich, turn off the engine and check the oil level using the dipstick. Add more oil if necessary to bring it to the correct level.

Changing the oil filter on a motorcycle is a relatively simple task that can greatly improve the performance and longevity of your engine. By following these steps and performing regular oil changes, you can keep your motorcycle running smoothly for years to come.